톰켓 하나의 서버에서 여러개의 톰켓 사용하기 설정방법

개발이야기 2018. 10. 18. 23:54

server.xml

* 빨간색으로 강조한 것들에 대해서 POST번호를 바꿔준다.

<?xml version="1.0" encoding="UTF-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->

<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.

Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->

<Server port="2005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
       description="User database that can be updated and saved"
           factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
          pathname="conf/tomcat-users.xml" />

</GlobalNamingResources>

<!-- A "Service" is a collection of one or more "Connectors" that share
       a single "Container" (and therefore the web applications visible
       within that Container). Normally, that Container is an "Engine",
       but this is not required.

       Note: A "Service" is not itself a "Container", so you may not
       define subcomponents such as "Valves" or "Loggers" at this level.
   -->

<Service name="Catalina">

<!-- A "Connector" represents an endpoint by which requests are received
         and responses are returned. Each Connector passes requests on to the
         associated "Container" (normally an Engine) for processing.

         By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
         You can also enable an SSL HTTP/1.1 Connector on port 8443 by
         following the instructions below and uncommenting the second Connector
         entry. SSL support requires the following steps (see the SSL Config
         HOWTO in the Tomcat 5 documentation bundle for more detailed
         instructions):
         * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
           later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
         * Execute:
             %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
             $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
           with a password value of "changeit" for both the certificate and
           the keystore itself.

         By default, DNS lookups are enabled when a web application calls
         request.getRemoteHost(). This can have an adverse impact on
         performance, so you can disable it by setting the
         "enableLookups" attribute to "false". When DNS lookups are disabled,
         request.getRemoteHost() will return the String version of the
         IP address of the remote client.
    -->

<Connector port="2020" maxHttpHeaderSize="8192"
               maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
               enableLookups="false" redirectPort="8443" acceptCount="100"
               connectionTimeout="20000" disableUploadTimeout="true" />

<Connector port="2009"
               enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />

<Engine name="Catalina" defaultHost="localhost">

<!-- The request dumper valve dumps useful debugging information about
           the request headers and cookies that were received, and the response
           headers and cookies that were sent, for all requests received by
           this instance of Tomcat. If you care only about requests to a
           particular virtual host, or a particular application, nest this
           element inside the corresponding <Host> or <Context> entry instead.

           For a similar mechanism that is portable to all Servlet 2.4
           containers, check out the "RequestDumperFilter" Filter in the
           example application (the source for this filter may be found in
           "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").

           Note that this Valve uses the platform's default character encoding.
           This may cause problems for developers in another encoding, e.g.
           UTF-8. Use the RequestDumperFilter instead.

           Also note that enabling this Valve will write a ton of stuff to your
           logs. They are likely to grow quite large. This extensive log writing
           will definitely slow down your server.

Request dumping is disabled by default. Uncomment the following
           element to enable it. -->

<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
             resourceName="UserDatabase"/>

<Host name="localhost" appBase="webapps"
       unpackWARs="true" autoDeploy="true"
       xmlValidation="false" xmlNamespaceAware="false">

<!-- Defines a cluster for this node,
             By defining this element, means that every manager will be changed.
             So when running a cluster, only make sure that you have webapps in there
             that need to be clustered and remove the other ones.
             A cluster has the following parameters:

className = the fully qualified name of the cluster class

clusterName = a descriptive name for your cluster, can be anything

mcastAddr = the multicast address, has to be the same for all the nodes

             mcastPort = the multicast port, has to be the same for all the nodes

             mcastBindAddress = bind the multicast socket to a specific address

             mcastTTL = the multicast TTL if you want to limit your broadcast

             mcastSoTimeout = the multicast readtimeout

mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat

mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received

tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes

             tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
                                in case of multiple ethernet cards.
                                auto means that address becomes
                                InetAddress.getLocalHost().getHostAddress()

tcpListenPort = the tcp listen port

tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout

printToScreen = true means that managers will also print to std.out

expireSessionsOnShutdown = true means that

useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
                            false means to replicate the session after each request.
                            false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
                            <%
                            HashMap map = (HashMap)session.getAttribute("map");
                            map.put("key","value");
                            %>
             replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
                               * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
                               * Synchronous means that the thread that executes the request, is also the
                               thread the replicates the data to the other nodes, and will not return until all
                               nodes have received the information.
                               * Asynchronous means that there is a specific 'sender' thread for each cluster node,
                               so the request thread will queue the replication request into a "smart" queue,
                               and then return to the client.
                               The "smart" queue is a queue where when a session is added to the queue, and the same session
                               already exists in the queue from a previous request, that session will be replaced
                               in the queue instead of replicating two requests. This almost never happens, unless there is a
                               large network delay.
        -->
        <!--
            When configuring for clustering, you also add in a valve to catch all the requests
            coming in, at the end of the request, the session may or may not be replicated.
            A session is replicated if and only if all the conditions are met:
            1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
            2. a session exists (has been created)
            3. the request is not trapped by the "filter" attribute

            The filter attribute is to filter out requests that could not modify the session,
            hence we don't replicate the session after the end of this request.
            The filter is negative, ie, anything you put in the filter, you mean to filter out,
            ie, no replication will be done on requests that match one of the filters.
            The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.

filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
            ending with .gif and .js are intercepted.

            The deployer element can be used to deploy apps cluster wide.
            Currently the deployment only deploys/undeploys to working members in the cluster
            so no WARs are copied upons startup of a broken node.
            The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
            When a new war file is added the war gets deployed to the local instance,
            and then deployed to the other instances in the cluster.
            When a war file is deleted from the watchDir the war is undeployed locally
            and cluster wide
        -->

        <!--
        <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
                 managerClassName="org.apache.catalina.cluster.session.DeltaManager"
                 expireSessionsOnShutdown="false"
                 useDirtyFlag="true"
                 notifyListenersOnReplication="true">

</Host>

</Engine>

</Service>

</Server>

'개발이야기' 카테고리의 다른 글

그리드에서 특정 Row를 선택못하게 하기 (0)	2018.10.20
오라클에서 Sequence 사용하기 (0)	2018.10.19
자바프로젝트로 웹어플리케이션 환경구축하기 - 3 ROOT.xml 사용하기 (0)	2018.10.18
자바프로젝트로 웹어플리케이션 환경구축하기 - 2 톰켓플러그인 사용하기 (0)	2018.10.18
자바프로젝트로 웹어플리케이션 환경구축하기 - 1 첫번째방법 (0)	2018.10.18

클라인STR

일	월	화	수	목	금	토
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30